Montarbo W18A Owner's Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 15
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
W18A
bi-amped, active loudspeaker system
Specifications
APPENDIX
11
Speaker system 2-way bass reflex
Components: custom designed to Montarbo specs
- bass frequencies 18" high efficiency woofer
Nominal diameter 18"
Frequancy range 32÷2000Hz
Power capacity 600W
Sensitivity 101dB
Rated impedance 4 Ohms
Net weight 13,5 Kg
TThiele & Small Parameters
fs 32Hz
Re 2,8 Ohms
Qms 5,45
Qes 0,31
Qts 0,293
Vas 0,376m
3
ho 3,85%
B.l 19,8T/m
SD 0,104m
2
Xmax 0,0099m
Pe 600W r.m.s.
- mid/high frequencies 2" driver coupled with a constant
directivity horn
Exponential horn
Nominal coverage (H x V) 90° x 60°
Cutoff frequency 500 Hz
Throat diameter 50 mm
Material aluminium fusion
Dimensions 435x270x230 mm
Net weight 3 Kg
Driver
Throat diameter 50 mm
Nominal impedance 8 ohms
D.C resistance 6,2 ohms
Power capacity 180 Watt RMS
Sensitivity 108 dB
Frequency range 500 ÷ 20kHz
Voice coil diameter 74,5 mm
winding material aluminum flat wire
former material kapton
Dome material titanium
Inductance 0,17 mH
Flux density 1,95 T
Overall diameter 165 mm
Depth 70mm
Net weight 4,8 kg
Impedance 4 ohm (bass) / 8 ohm (mid/high)
Frequency response 40Hz ÷ 20kHz
- bass: 40Hz ÷ 800Hz
- mid/high: 800Hz ÷ 20kHz
Sensitivity (1W / 1m) 101 dB SPL
Max SPL 131 dB
Built-in electronic crossover:
crossover frequency 800Hz
slope 24dB/Oct
Built-in power amplifiers 2 MOSFET (class AB);
2 independent processors
Max. output power 850 W continuous / 1200 W peak
- bass 600 W continuous (4 ohms @ 0,1%THD)
850 W peak
- mid-high 250 W continuous (8 ohms @ 0,1%THD)
350 W peak
Forced cooling, thermostatically
controlled low turbolence fan
Frequency response 35Hz ÷ 25kHz +0/-1dB
Input impedance 10KOhms (balanced)
Input sensitivity 0dB (775 mV)
Noise referred to input - 108dB (A weighted)
Power supply 220 V.A.C. 50÷60 Hz / Fuse: F 6,3AL
on request 117 V.A.C. 50÷60Hz / Fuse: F10AL
Connections Balanced male (OUT) and female (IN) XLR
inputs wired in parallel
Construction and finish Phenyl-glued multiply birch
Polyurethane paint
Dimensions (w x h x d) 54 x 87 x 45 cm
Weight 55,7 Kg
Block diagram
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments